Description
Description:
Ceresit CT 98 provides best washing and degreasing heavily dirty facades of the buildings constructed in the ETICS technology finished with thin coats of mineral, acrylic, silicate, silicone and silicate-silicon plasters, in the traditional technologies, such as cement and lime plasters, facades made of natural stone, artificial stones or finished with ceramic coating and facades made of glass and aluminium. The product is a component of the Ceresit Ceretherm Repair system. After washing the facade with the concentrate surfaces may be renewed by painting with Ceresit paints. It may also be used to clean and degrease the mineral floors which are contaminated before successive layers of floor are applied. It removes motor oil, dry dirt, salt sprinkled on the roads, soot and light hydrocarbons. It can also be used to clean glass and plastic. It is intended for indoor and outdoor applications.
Properties:
– Effectively Removes Dirt from the Facade
– High Performance
– Indoor and Outdoor Use
– Does not contain caustic substances
– Removes Dirt’s, Oils, Greases
Facade cleaning
Wash the façade with a pressure washer using Ceresit CT 98 stain remover.
In the first stage spray the surface with Ceresit CT 98 stain remover (dilution according to the intensity of the stain) and leave for 10-15 minutes. You can also use a brush or a sponge for application. The concentrate CT 98 can be diluted by water from 1:1 to 1:4.
Then wash the facade with water using a pressure washer or a brush and leave it to dry.
Depending on contamination level, it may be necessary to repeat these steps.
Features and Benefits:
Concentrate to remove impurities, provides washing and degreasing heavily dirty facades in the ETICS technology finished with thin coats of material, acrylic, silicate, silicone and silicate-silicone plaster
Reviews
There are no reviews yet.